[Amps] Acom 2000A - typical output power?

[Kevin]

There are two versions like they did with the 2500A. One "FCC Approved", 
and limited to 15dB gain, and the other not. Array Solutions doesn't 
sell the non-FCC Approved versions. All the OM Power amps are using the 
Chinese version of the 4CX1000A, the FU-728F, either singly or a pair.


On 9/11/2016 5:53 PM, Bill Turner wrote:
> ------------ ORIGINAL MESSAGE ------------(may be snipped)
>
> On Sat, 10 Sep 2016 15:18:40 -0400, you wrote:
>
>> To the original poster:  another option to consider is the OM POWER 2000A+
>> ("A" for auto-tune).  If purchasing new, it's less than the ACOM 2000A and
>> covers 6m.  Single FU-728F tetrode, Auto-tune 2KW+ on CW/SSB, 1500W RTTY on
>> 160-10, 1300W on 6m.  The amp appears to be based on the manual-tune OM2000+
>> with the addition of a touch screen display and native Ethernet
>> connectivity.
>>
>> Paul, W9AC
> REPLY:
>
> According to the OM website, it does not yet have FCC approval. Is
> that correct?
>
> They list the gain as 17 dB, which exceeds the FCC limit. Is that also
> correct?
>
> Array Solutions seems to be selling these, although their website is
> down for maintenance right now so I can't verify.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

-- 
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus