[Amps] issue with AL-1200 output -UPDATE NUMBER 2-

[Doug Ronald]

I have three Collins CU-1169 antenna tuners where each vacuum variable has
spark gaps. Of course being Collins, the gaps are adjustable silver plated
spheres with current sample resistors for the electronic hardware to sense
when an arc has occurred. I am parting-out these couplers if anyone has
interest...

-Doug W6DSR 

-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Tom Osborne
Sent: Tuesday, June 27, 2017 10:07 AM
To: amps at contesting.com
Subject: Re: [Amps] issue with AL-1200 output -UPDATE NUMBER 2-

>
>  ##Then a mating, non adjustable,  ground down, 2nd machine screw.  
> Then some locking nuts etc, so when adjusted, tweaked,  to the desired 
> gap, its then locked down.
>
____________________________________________________________

Hii Jim

Would this work in an antenna tuner to keep it from arcing and blowing out
the bandswitch?  How do you know when this is adjusted right?   73
Tom W7WHY
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps