[Amps] 240 Volt Blowers needed
Jim Brown
jim at audiosystemsgroup.com
Mon Mar 20 17:17:43 EDT 2017
On Mon,3/20/2017 2:04 PM, Carl wrote:
>> Yes, remember that it's perfectly OK to run a 120V load between one
>> side of the TX primary and its center tap. This is often done by the
>> first rate amp mfrs. And remember that it is NOT OK (and is illegal)
>> to run a 120V load between one side of the line and ground. Indeed,
>> putting load current on ground is a recipe for hum pickup. And
>> bonding neutral to ground is even worse.
>>
>> 73, Jim K9YC
>
> Except those high enders that went to ground
I don't understand what you mean, Carl.
73, Jim
More information about the Amps
mailing list