[Amps] Stripping Litz

[Jim Thomson]

Date: Wed, 17 May 2017 17:11:29 +0000
From: Manfred Mornhinweg <manfred at ludens.cl>
To: amps at contesting.com
Subject: Re: [Amps] Stripping Litz

<Litz wire most commonly has polyurethane insulation. This is solderable 
- you don't need to strip it!

##  If a builder has no access to Litz wire, plan B  would be to use some fine gauge
magnet wire, and use a bunch of em in parallel, then twist the assy  so it ends up like
stranded wire. Then you still have access to the individual wires at each end of the
completed assy. 

Jim  VE7RF