[Amps] Glitch resistor + fuse?

Catherine James catherine.james at att.net
Mon Nov 13 10:48:23 EST 2017


I had a HV short occur in my SB-220 upstream of the glitch resistor.  Someone had installed a fuse in the HV circuit, but it didn't blow.  (I haven't looked to see what rating they used.) 

I wouldn't count on a fuse to save the amp.

73,
Cathy
N5WVR

--------------------------------------------
On Mon, 11/13/17, Dick NY1E <dick at ny1e.com> wrote:

 Subject: [Amps] Glitch resistor + fuse?
 To: "amps at contesting.com" <amps at contesting.com>
 Date: Monday, November 13, 2017, 10:03 AM
 
 I have 2 amplifiers, an SB220 and a TL922A,
 they both had 10 watt glitch resistors added before I got
 them, they have each done their job but self destructed when
 they did. I replaced them with 25 watt when it happened. My
 question is, one has a 1 amp fuse in series with it. Is that
 necessary or is it going to blow needlessly when the glitch
 resistor would handle it?
 Any opinions?de Dick NY1E
 _______________________________________________
 Amps mailing list
 Amps at contesting.com
 http://lists.contesting.com/mailman/listinfo/amps
 


More information about the Amps mailing list