[Amps] Series C in amp output

[Martin Sole]

Okay, thanks to Bill and Steve I think we can say it's just a safety 
measure in case of blocking cap failure. Maybe these amps don't have the 
traditional RFC across the output. Never did like that idea, always 
thought they looked a bit ineffective if faced with an amp or more at a 
few kV.

Martin, HS0ZED


On 10/02/2018 00:48, Steve Wright wrote:
> It's just a safety DC-->antenna block, in case of HT badness in the tank
> circuity.
>
>
> On 09/02/18 23:06, Martin Sole wrote:
>> Amps from Acom and OM, maybe some others, have a large amount of
>> capacitance in series with the output after the power/SWR bridge. In
>> the case of the Acom 1000 this is 6 parallel 10nF/500v disc ceramic
>> capacitors with a 1 megohm (static bleed?) across them.
>>
>> Have not seen this configuration on older Alpha amps or others. Can
>> anyone comment on the purpose?
>>
>> Thanks
>>
>> Martin, HS0ZED
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps