[Amps] K3 & THP HL-2.5KFX

[William Liporace]

Hi Folks,
I think I have the pin outs correctly. I know there is a low output 
voltage on the K3. I don't know why the AMP does not like the K3. I have 
the AMP set for Yaesu. That is basically what the band data is for the 
K3/Yaesu. I would love some tips, tricks, help, and etc...

Here is what I know:

         K3 DB15  = THP HL2.5
Ground    5/12   = 5
Data 0/A  13     = 3
Data 1/B  3      = 11
Data 2/C  9      = 4
Data 3/D  14     = 12

IF you can point me in the right direction, I would appreciate it.

Will WC2L

-- 
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
wc2l at wc2l.com