[Amps] Looking for service manual

[kstover at ac0h.net]

I know a guy who cleaned a cruddy amplifier using the dishwasher. Took the meters and transformers out and ran it through one cycle. To make sure all the water was gone he set the chassis out on his deck for a day to dry out totally. Yep, left the tubes in it.

R. Kevin Stover    AC0H

ARRL, FISTS, SKCC, NAQCC.
One of the guys that made sneakernet irrelevant, in my little corner of the world.
“If it doesn’t work the first time you push the button it won’t work the 20th…Just stop.”

-----Original Message-----
From: Amps <amps-bounces at contesting.com> On Behalf Of Roger (K8RI)
Sent: Monday, June 4, 2018 9:15 PM
To: amps at contesting.com
Subject: Re: [Amps] Looking for service manual

Be careful using high pressure to clean electronics. If there are moving parts and mechanical connections, high pressure "MAY" force small particles into places you don't want.

73, Roger (K8RI)

On 6/3/2018 6:15 AM, John Randall via Amps wrote:
> I have aquired a EIN 350L class A rf amplifer ( analogue meter covering 150Hkz - 105 Mhz ) which I want to use on 470Khz. I am looking for a copy of the service manual for this amplifier if anyone can help. Enquiries to the local dealers have not turned up any reply. The inside is extremely dusty and needs a good clean out ( standing for years ) which I have begun in stages, but am awaiting a high pressure blower off amazon to get to those hard to get places. The amp works using  my WSPRLite tx with an attenuator in series....The amp is made in Rochester N.Y.
>
> ThanksJohn M0ELS
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


--
Roger (K8RI)


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps