[Amps] ten tec centurion qsk
MU 4CX250B
4cx250b at miamioh.edu
Mon Dec 9 13:32:08 EST 2019
Terry, your comment confuses me. Are you saying one or more of the following:
(a) The coil of the input relay shows continuity when the relay is
removed from the amplifier.
(b) The relay is energized ("draws current") in both the standby and
operating mode.
(c) The relay contacts do not move at any time, but remain stuck in a
frozen, normally open configuration even when the coil is energized.
73,
Jim w8zr
Sent from my iPhone
> On Dec 9, 2019, at 10:36 AM, Terry's ham <k7ny at live.com> wrote:
>
> I forgot I pulled the input relay and it was fine. It draws current in standby or operate.
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list