[Amps] 30L-1 rebuild

[donroden at hiwaay.net]

I'm rebuilding a 30L-1 using a Young Kim Cap and Diode board.
Sometime in it's past, the two 10 ohm 2 watt carbon composite  
resistors that connect the power supply HV to the RF deck were smoked.  
  This isn't going to be a perfect restoration, ( obviously with the  
Young Kim board ) so I'm wondering what type resistors would be  
suitable to replace the carbon composites.  Or should I keep looking  
for 10 ohm / 2 watt composite resistors ?

Don W4DNR