[Amps] Second Fan for 87A

[Carl]

If it is like my 76PA 3 holer with the basic EI transformer any 
generic120VAC muffin fan will work as all it needs to do is move a little 
air around the PS side.
I used one from a scrapped vintage PC PS using existing rear panel 
perforation holes and can barely hear it.

It has been fine over years of contesting and even when used as an AM linear 
the iron stays cool.

If the 87A dos not have a 120V take off point then the 240V one is needed.

Carl

----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: "Amps Amps" <amps at contesting.com>
Sent: Tuesday, February 26, 2019 4:11 PM
Subject: [Amps] Second Fan for 87A


>I have two 87As, both bought used. One has the second fan, the other does 
>not. I'd like to add it to the one that doesn't. Can someone provide model 
>numbers for one or more suitable fans?
>
> Thanks and 73, Jim K9YC
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 


---
This email has been checked for viruses by AVG.
https://www.avg.com