[Amps] DIGITAL BARGRAPH DISPLAYS
Roger (K8RI)
k8ri at rogerhalstead.com
Sun Mar 3 23:06:15 EST 2019
Amps running 100% duty cycle modes need a lot of overhead. Re-tuning is
fine for the legal limit minded, but many will use that overhead to run
2.5 KW or however much they can get out of it.
Microprocessor controlled auto-tune amps generally are programmed to
run a max of 1500 watts in any mode, regardless of how much overhead is
present, BUT using ALC has often led to a lag with the leading edge of
the drive hitting the top of that overhead producing a full bore pulse
73, Roger (K8RI)
On 2/22/2019 4:53 PM, Jim wrote:
> /* snip */
>> and I would make it so an increasing reflected power value would cause
>> the ALC to back off the drive, I think every H. P. amplifier should do
>> that.
>
> Why?
> For what reason? Just re-tune.
>
> 73
> Jim W7RY
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--
Roger (K8RI)
More information about the Amps
mailing list