[Amps] QRO 2500DX MARK lll 4CX800

[Alek Petkovic]

Same thing happened with a Russian GU84B tetrode in the Emtron DX-2SP, 
at my local radio club.  The resistive cathode to grid connection only 
becomes evident as the valve heats up. Strange.

73, Alek. VK6APK

On 30/03/2019 4:37 AM, Bob Gibson via Amps wrote:
> After sending all three tubes down to be checked at D&C Electronics all three tubes came back bad..the test showed..that once the tube comes up to operating temperature there is a resistive cathode to grid short present possibly indicating a warped grid or screen.. My question is why would all three come back the same..I knew one tube was bad but to have all tubes test the same was a little odd..Anyone have any ideas..Bob W5RG
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>    

-- 
 From sunny Binningup



Family Businesses:
SP Electrical. www.spelectrical.net.au
The Velvet Fox. https://www.facebook.com/TheVelvetFox/
Smart Design Electrical. https://www.facebook.com/smartdesignelectrical/
Perth Interiors. https://www.instagram.com/perthinteriors/