[Amps] Bandswitch For Ten Tec Titan 425

[Martin Sole]

Hi Ken,

I don't know that exact switch well but probably big enough to be 
possible that you can drill out the rivet then replace the contacts with 
some from an otherwise unsuitable wafer, think that's been standard 
practice on a number of  abused or poorly designed amps over the years. 
Unless of course its the wiper that's knackered!

A good rummage through some well stocked junque boxes should yield 
something suitable. I've likely got an old switch wafer here that would 
work for cannibalizing but you'd have to come get it :)

Martin, HS0ZED



On 30/04/2019 08:18, Ken Claerbout wrote:
> I have a pristine 425 amp which has a destroyed back wafer on the
> bandswitch. It's the wafer that switches in the 400 pf doorknob cap
> and segments of the tune cap.
>
> I'll keep searching, but I wonder if anyone has a part number or knows
> where I might get a replacement?
>
> 73
> Ken K4ZW
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps