[Amps] Tips For Winding a Plate Choke
Carl
km1h at jeremy.qozzy.com
Wed Oct 9 21:04:09 EDT 2019
Ive had no problems from squeezing the Ameritron choke into Alpha 76/78's
etc which is about as tight as you can get.
Carl
----- Original Message -----
From: "Jim Thomson" <jim.thom at telus.net>
To: "Roger - W7TZ" <ai7rogerroger at gmail.com>; <amps at contesting.com>
Sent: Tuesday, October 08, 2019 5:08 PM
Subject: Re: [Amps] Tips For Winding a Plate Choke
> ## They can be mounted either vertically or horizontally, both
> mounting schemes work.
> Typ vert mounting is used. Either way B+ has to be fed to the
> base of the plate choke.
> Also, bypass caps have to be installed at base of plate choke.
> Also, you dont want to mount
> a plate choke parallel to a sidewall, nor the chassis. The stray C
> will screw up the choke,
> and shift its series resonances... down in freq.... which could
> easily cause catastrophic results.
> If you do mount parallel to sidewall or chassis, choke should be at
> least 3 x its diameter away
> from surrounding metal. Vert mounting solves these issues.
>
> Jim VE7RF
>
>
>
>
> From: Roger - W7TZ
> Sent: Monday, October 7, 2019 9:14 AM
> To: amps at contesting.com
> Cc: Jim Thomson ; MU 4CX250B
> Subject: Re: [Amps] Tips For Winding a Plate Choke
>
> Out of curiosity, is there a particular reason that HV chokes are
> typically mounted vertically and not horizontally?
>
> 73, Roger
> W7TZ
> CN83ia
> Grid Busters
> w7tz.webs.com
>
>
> On Mon, Oct 7, 2019 at 8:57 AM MU 4CX250B <4cx250b at miamioh.edu> wrote:
>
> Oops, I meant 1rps, not 1rpm!
> Jim w8zr
>
> Sent from my iPhone
>
> > On Oct 7, 2019, at 9:50 AM, Jim Thomson <jim.thom at telus.net> wrote:
> >
> >
> > ## 1 rpm is too slow....it will take forever to wind. 30-60
> rpm works good.
> > A slowed down drill press will also work
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by AVG.
https://www.avg.com
More information about the Amps
mailing list