[Amps] SB-220 HV Transformer Wanted

[Joe]

Why need them?

Run it at the HV side and use less drive and less currents all around.

The CW/SSB switch I converted into a stand-by switch.

Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 10/30/2019 1:38 PM, Joe Subich, W4TV wrote:
>
> >> https://www.antekinc.com/as-8t800-800va-transformer/
>
> Unfortunately, this transformer lacks the primary taps for CW/SSB
> operation of the OEM device.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2019-10-30 10:23 AM, Joe wrote:
>>
>> On 10/30/2019 8:56 AM, Joe wrote:
>>> Morning Dick,
>>> If you are not afraid of making a few electrical and mechanical 
>>> modifications, I would go with this transformer.
>>> https://www.antekinc.com/as-8t800-800va-transformer/
>>>
>>> I'm glad I did! 1/4 the cost of most drop in replacements. yet MUCH 
>>> better performance!
>>> Joe WB9SBD
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>