[Amps] HV Fuse

[Carl]

That works until it doesnt and then creates a nice wild plasma arc. That is 
something to watch!!

Carl


----- Original Message ----- 
From: "Rob Atkinson" <ranchorobbo at gmail.com>
To: <amps at contesting.com>
Sent: Saturday, September 21, 2019 7:27 AM
Subject: Re: [Amps] HV Fuse


>I always thought the way to make a h.v. fuse was to bolt a pair of
> ceramic standoffs in a convenient location, making them around 2 or 3
> inches apart, and stretch a very thin gage copper wire between them,
> roughly at or slightly less then the diameter of the plate choke wire,
> then run the B+ line through this.   The standoffs should be taller
> than the distance between them.
>
> 73
> Rob
> K5UJ
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 


---
This email has been checked for viruses by AVG.
https://www.avg.com