[Amps] ACOM Director software

[David Robbins]

In order to do power on/off you need the optional RPON module from ACOM.  If
you have that then you can turn the amp on and off remotely.  

A bug in the amp, I think, prevents you from clearing the PROT light
remotely, so if you get a fault that will keep blinking even when the amp is
working again.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: telnet://k1ttt.net:7373



-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Robert
Sent: Monday, August 03, 2020 02:54
To: amps at contesting.com
Subject: [Amps] ACOM Director software

 

 

The ACOM 2000 has RS232 port on back

 

Control software program is available from M0YOM 

 

Anyone have experience with this method?

can it do remote on/off - aka from other side of router via internet? 

 

Thanks

W5AJ

 

Robert

Midland, Texas

 

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps