[Amps] B+W 850A parts?

[Carl]

Id use the same material as used in the Ameritron 1500W amp coils

Whatever that is, I keep forgetting! It might help to put some air flow on 
them as the values are not ideal over a wide range of tube loads. The spec 
was 2500-5000 Ohms

Carl


----- Original Message ----- 
From: "Mike Keller" <w1bnc52 at gmail.com>
To: <amps at contesting.com>
Sent: Friday, August 07, 2020 1:30 PM
Subject: [Amps] B+W 850A parts?


>I was fortunate to save a Classy home brew 2 / 4-400 KW amplifier in a 4ft 
>rack from a trip to the landfill and am trying to bring it back to life. 
>The coil support rods in the B+W 850a are missing and I am looking for 
>suggestions for replacements.
>
> Mike Keller
> W1BNC
>
> Typos bye iPhone
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 


---
This email has been checked for viruses by AVG.
https://www.avg.com