[Amps] ALL 811H hanging relay

[Dave’s]

Hi Tom,

Before you tear everything apart, pull the tubes and turn on the amp. If the relay behaves correctly and you have normal signal strength received signals, you most likely have a shorted 811A tube. This is a very common symptom.

73,
Dave, K2DP, St. Louis, MO

Sent from my iPad

> On Aug 8, 2020, at 3:57 PM, Tom Osborne Sr. <w7why1 at gmail.com> wrote:
> 
> Hi Again.
> 
> My AL-811H antenna relay is acting up.  When it goes back to receive
> sometimes it is not making contact and receive is way down.  I thought I
> would take the case off and clean the contacts on the relay.
> 
> To my surprise, the relays are not open frame where you can get at them.
> 
> So - I guess the only solution would be to pull the board and unsolder the
> relays??  Not looking forward to having to do that   73
> Tom W7WHY
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps