[Amps] Transformer Question
Victor Rosenthal 4X6GP
k2vco.vic at gmail.com
Thu Feb 27 07:49:27 EST 2020
I suspect those capacitors were actually in series and he added up the
values printed on them.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 27/02/2020 14:45, Rob Atkinson wrote:
>> rather hefty choke and 500 uF of capacitors (replaced with computer grade
>
> That is way way way too much capacitance. With a filter choke (choke
> input filter) you probably only need at most 10 to 20 mfd capacitance.
> You have around 20 times too much and that's probably why the power
> supply tranny crapped out.
>
> The Ameritron transformer will be okay IF you can get by with lower
> power out due to the 200 v. less of B+ AND you have to look at the
> current pull of four 811A filaments and see if they exceed the 16A
> filament rating of the transformer. But, get the filter capacitance
> down to at most 20 mfd if the choke is around 10 Hy. You can put in
> a pair of 10 mfd 2 KV oil caps paralleled--actually one will probably
> be enough.
>
> 73
> Rob
> K5UJ
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
More information about the Amps
mailing list