[Amps] Henry 2K-4 Failure
mark bitterlich
markbitterlich at embarqmail.com
Thu Mar 19 21:32:24 EDT 2020
Or you could try a new tube ......
-------- Original message --------From: Adrian <vk4tux at gmail.com> Date: 3/19/20 18:17 (GMT-05:00) To: Jim Thomson <jim.thom at telus.net>, amps at contesting.com Subject: Re: [Amps] Henry 2K-4 Failure Thanks Jim, you can't beat words from those experienced.I guess a cathode test plug could be made to substitute one tube plugging intothe socket .A dead tube could have its base made up for this, with resistor added tocathode connections equalling the hot value.Then interchange tubes on the remaining socket to compare.vk4tuxOn 20/3/20 3:32 am, Jim Thomson wrote:>> Grid to cathode short & ?stayed failed? means you just need an>> ohmmeter. No need to swap tubes, etc.>>>> Gerald, VE1DT>>> ## Nope. The grid to cathode short only happens with tube fil lit..... not when cold.> When cold, both a HI pot tester.... and also a megger wont work either.>> Jim VE7RF> _______________________________________________> Amps mailing list> Amps at contesting.com> http://lists.contesting.com/mailman/listinfo/amps>_______________________________________________Amps mailing listAmps at contesting.comhttp://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list