[Amps] single phase into 3 phase transformer
Doug Ronald
doug at dougronald.com
Wed Apr 21 13:29:42 EDT 2021
Simply short-out all the windings on one leg, probably one of the outside
legs to keep the flux path shorter. Then the two legs left will get all the
flux and behave like a single-phase transformer. Phase the two windings
remaining remembering that the flux circulates in a loop around the
remaining legs.
I have done this with my power distribution system and have found very low
loss in the now single-phase transformers.
73, Doug, W6DSR
-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Fuqua, William
L.
Sent: Wednesday, April 21, 2021 00:47
To: amps at contesting.com
Subject: [Amps] single phase into 3 phase transformer
What is the preferred method to wire a 3 phase transformer to operate off of
single phase?
I have heard of several possibilities and happen to have a mess of multi kW
three phase HV transformers.
73
Bill wa4lav
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list