[Amps] Alpha 76PA Conversion - Drive Issue

[Peter Voelpel]

Indeed, 2.5KV were specified in the preliminary data sheet from 1983.

73
Peter, DJ7WW

-----Original Message-----
From: Jeff DePolo [mailto:jd0 at broadsci.com] 
Sent: Donnerstag, 2. Dezember 2021 21:31
To: 'Peter Voelpel'; amps at contesting.com
Subject: RE: [Amps] Alpha 76PA Conversion - Drive Issue

> Eimac specified a maximum of 2250V.
> 
> 73
> Peter

Yes, and it seems that limit was adhered to by amateur amplifier
manufacturers about as well as speed limits are obeyed here in the US  :-)  

As others have said, I think Steve would find a significant improvement in
gain with higher plate voltage, with 2.5 kV or so being a good target.
	
					--- Jeff WN3A



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus