[Amps] SB-200 Mods

[Carl]

The low mu GI-7B is about as IMD dirty it can be for SSB. and users should 
be drawn and quartered..

CW and digital is fine.

Carl



----- Original Message ----- 
From: "gudguyham via Amps" <amps at contesting.com>
To: "Jeff Blaine" <KeepWalking188 at ac0c.com>; <amps at contesting.com>
Sent: Thursday, January 28, 2021 6:55 AM
Subject: Re: [Amps] SB-200 Mods


>I agree with Jeff, adding 160 is just too much work and it would be a 
>compromise at the end of the day. You’ll end up spending more money and 
>time than if you got your hands on a hacked 200 for CB or just one that 
>suffered a band switch blow out. Tear it apart and build it as a mono band 
>160 amp instead. Now that will work perfectly and put out lots of power and 
>it WON’T be a compromise! I’ve been there done that.
>
>
> Sent from the all new Aol app for iOS
>
>
> On Wednesday, January 27, 2021, 11:55 PM, Jeff Blaine 
> <KeepWalking188 at ac0c.com> wrote:
>
> I spent a bit of time on that amp a while back. Involved a GI7B
> conversion but warc operation was part of the goal. I forget which warc
> band it was that the plate choke is self resonant close too, but it's
> one of them. You would need to treat it for that.
>
> My rationale for the project was to hone my construction, amp and design
> skills so the investment has some payback in perpetuity. The amp today
> sits on the shelf with a variety of problems, never to see RF again.
>
> In fact, given I did spend a massive amount of time and money on that
> project, in retrospect I have many times strongly recommend guys asking
> me about the project to just track down an AL80b (single tube 3-500z
> amp) instead. The AL80b is about 10x the amp in just most other than
> sentimental respects. And it's relatively easy to sell an unmodified
> SB-200 as well.
>
> 73/jeff/ac0c
> alpha-charlie-zero-charlie
> www.ac0c.com
>
>
> On 1/27/21 9:08 PM, Jim wrote:
>> And this was converting it to ONLY 160 meters. Not adding 160 to it.
>>
>>
>> If you search on SB200 160 meters, you will find many examples.
>>
>>
>> Thanks
>> 73
>> Jim W7RY
>>
>> On 1/27/2021 7:31 PM, Jim wrote:
>>> There was an article in one of the 60-70s arrl handbooks about a 160
>>> meter conversion to an SB200.
>>>
>>>
>>> Thanks
>>> 73
>>> Jim W7RY
>>> On 1/27/2021 3:56 PM, Jim Koshmider via Amps wrote:
>>>> Has anyone in the group modified an SB-200 for 160 meters, or for
>>>> the WARC bands? Any info would be appreciated.
>>>> Thanks.
>>>> 73,
>>>> Jim, K8OZ
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 


---
This email has been checked for viruses by AVG.
https://www.avg.com