[Amps] 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 12

[Peter Voelpel]

With smaller vacuum caps, closer to the grid and only 2" separation between
them, Q could be much lower and more L for a proper coil might be used.

73
Peter

-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of jim.thom 

<I have a bigger coil in my 2m amp and my 6m amp has quite a few turns.

<73 and thanks, Alek, VK6APK.

## The tube is run at 5.5 kv @ 3amps under load.  Plate load Z = 1019 ohms.
With a conventional PI network, the MINIMUM Q we can use is a whopping 24.
That results in an insane  79 amps of RF flowing through the conventional