[Amps] What to do about 'Neutral' in HB amp?

[Martin Flynn]

On 12/28/2022 2:18 PM, Paul Christensen wrote:
> Even if there is NOT a neutral, it's created by design fault in some amps
> and appliances.  In the case of the 70/77 series amp, there's no separate
> neutral conductor connection point unless the owner: (1) modifies the amp at
> the power connector to isolate the blower return from the chassis; and (2)
> runs 4-wire service to the amp receptacle.
Exactly correct - Ran a 70A where the neutrals were connected at an 
added terminal strip, and a 4 wire cord set used.  No DC continuity 
between N and G on the chassis