[Amps] VHF1200 6m cabinet hardware?

[Aleksandar Petkovic]

Yes. Agreed.

For us non US folks, Ebay is your easiest source of those types of screws.

I actually bought shiny stainless steel ones for my AL-1500.

I also bought a set of three 6/32 taps as I had a couple of the original 
screws busted off. I filed the stubs flat with the chassis and then was 
lucky enough to drill them out cleanly. A quick follow through with the 
bottoming tap and I was back in business.

73, Alek, VK6APK.

On 8/07/2022 5:25 am, gudguyham--- via Amps wrote:
> Just use a simple 6x32 sae screw about 1/4 “ long with a Phillips head in black oxide.  Don’t bother with the Allen head it’s a PITA.
>
>
> Sent from the all new AOL app for iOS
>
>
> On Thursday, July 7, 2022, 4:47 PM, GD0TEP <gd0tep at manx.net> wrote:
>
> Hello to the group,
>
> I have a Command technologies VHF1200 6m amp.
>
> The amp itself is fine, but it's and I'm not the first owner, and I know it
> has seen some 'issues' over the years. Thus the covers have been off & on a
> few times. As such the screws are worn and I'd like to replace them. I'm
> talking about the little allan screws.  They might be made of brass (or
> chocolate) as the allan holes are worn out, so they are next to useless.
>
> Does anyone know what thread size these might be please?
>
> 73
> Andy
> GD0TEP
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps