[Amps] 10 kw CCS on 6M. Part-3

[Pete Smith N4ZR]

OK, I give up - what's the point of 10 KW CCS?

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

On 9/9/2022 1:39 AM, jim.thom jim.thom at telus.net wrote:
> 10 kw CCS on 6M..using the 3CX-6000A7.
>
>
> Ok, here's the 3rd installment of this project.
>
> Here, the socket and chimney are installed. Due to space constraints, the
> tube is in the corner. To get around piling on more stray C ..between side
> / rear wall..and anode, I had him space the anode 2.5" away from both. When
> the space is say doubled, the C will drop to just 1/4. Same deal with
> spacing between stator + rotor plates on an air variable.
>
> Also note, instead of using machine screws to mount the .515" thick chimney
> to the chassis...threaded studs were used instead. Studs screwed into the
> teflon. Then chimney + studs dropped onto chassis. It's another way of
> doing it. If mounting the chimney to the top lid, it's actually much
> quicker using the studs.
> https://www.youtube.com/watch?v=RBIT76-o6tM
> <https://www.youtube.com/watch?v=RBIT76-o6tM&fbclid=IwAR10CtUWkUQ-LTRBvq6StAPbI2dhthPZTW5815ahAeuSY2t3I0ki02JF0vQ>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps