[Amps] Pole Type Transformer Alternative Plate Transformer.

[jim.thom jim.thom@telus.net]

Pole Type Transformer Alternative Plate Transformer. Note, if you have one
of these custom wound, get them to wind the 240 vac winding on 1st...then
the HV winding on top of that. The 240 vac winding does not require a CT.
You can also get them to provide taps on both the pri + sec windings. Have
both windings wound with copper. ( I have seen the 240 vac winding done
with aluminum tape, and don't recommend it, since Al only conducts 60% as
good as Cu). Typ you can get them from 3.5 kva and higher.

https://www.youtube.com/watch?v=DG1RKoZ6knI