[Amps] Anyone know what the specs are for the two panel meters on Amp Supply LK450-500-550 series?

[gudguyham at aol.com]

There are 1ma movements with about a resistance of around 30 or so ohms.  Full scale voltage is around 30mv.  You can reshunt any meter to make it work.


Sent from the all new AOL app for iOS


On Tuesday, October 31, 2023, 9:02 PM, wb0gaz via Amps <amps at contesting.com> wrote:

 Are the panel meters (plate current, and grid current/HV) considered a milli- or micro-amp meter or a voltmeter? No info in the manuals. They are (per the schematic) both effectively across sub-ohm shunt resistors (grid current is across the sub-ohm shunt resistor to ground; plate current is across the next-up sub-ohm resistor towards the HV PS negative terminal.)

Thanks for any suggestion/info

Dave
  
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps