[Amps] Brand new updated PS board for Command Technology amplifiers

[A J]

The front panel meters are sandwiched between the control board and the 
front panel with spacers in-between.

Power supply is a full wave bridge, with a massive Hypersil,  Dahl 
transformer ~ 65lbs Ht ~3440 vdc at my location, not sure on the current 
rating , it did not flinch when operating. (~15.5X9X8) .

Any of the Commander Amps that I have seen and or own have the glued in 
meter. All of the Palstar I have seen are bolted.

*/AJ___ VE3HJ
/*

On 1/22/24 06:58, Rob Atkinson wrote:
> I hope Palstar's changes included mounting the front panel meters with
> nuts and bolts.  The Command amp we looked at had the meters GLUED to
> the front panel, something I have never seen before or since in a
> commercially manufactured RF equipment.  Also, the power supply was a
> voltage doubler.  This must have been one of Pat Stein's early
> efforts.
>
> 73
>
> Rob
> K5UJ
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

-- 
Knowledge is Power and Power is Knowledge.___AJ___1967