[Amps] installing a new 3CX1200D7

[gudguyham at aol.com]

If the tube is instant on idling it won’t to anything.  Just let it rip.


Sent from the all new AOL app for iOS


On Monday, November 11, 2024, 12:46 PM, Carl Braun <Carl.Braun at cattron.com> wrote:

Please offer any suggestions for installing a new triode in a Henry amplifier.

I've purchased a NEW Eimac 3CX1200D7 (YU121) from Richardson Electronics as I wanted a spare for my Henry Ultra amplifier. The amplifier is running well with its original (1991) Eimac 3CX1200D7 in place, so I want to remove that one and place the new one in service to ensure its working well and to determine output.

What is the best way to start up a new ceramic triode?  My plan was to install the tube and turn on the amp and let it idle for 4 hours before applying any RF to it.  The 3CX1200D7 is an instant on tube that will have 3600/4600V plate voltage and 6.3V on the filament.

Suggestions?

Carl W9LF

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps