[Antennaware] Hygain DX-88 Modification suggestion

david.e.burger at au.pwcglobal.com david.e.burger at au.pwcglobal.com
Fri Feb 21 16:10:52 EST 2003

Just thought I'd let people know about a compromise performance enhancing
modification to this gem of an antenna.   I use my DX-88 only on 80~12m, as
I have an extensive array of 10m antennas.  So, observing the DX-88
performance on 10m was akin to a dummy load anyway (compared to my 7 and 8
element yagis on 10m).. I proceeded to calculate how much longer the
antenna would be without the 10m trap.

I settled on 720mm, and subsituted an alumiunium tube (we mostly have
metric tubes here nowdays - so it was a challenge) in place of the 10m coil
and tubular capacitor.

Well everything worked fine.. with tweaking for 30m required to a point
where the existing tubing overlaps just 30mm (just over an inch).

There is noticeable improvement on the TX side of things on all bands
now... minus 10m. Funny enough it does receive quite well on 10m.. but the
VSWR is off the wall as one would expect.

David VK2CZ / VK8AA
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material.  Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited.   If you received
this in error, please contact the sender and delete the material from any

More information about the Antennaware mailing list