[Antennaware] Feeding transmission lines with a common source

[Paul Playford]

Connect the transmission lines and feed lines all at the same point on your
short wire.  They will appear in parallel.

de Paul, W8AEF

----- Original Message ----- 
From: "Pete Smith" <n4zr at contesting.com>
To: <antennaware at contesting.com>
Sent: Tuesday, May 27, 2003 8:05 PM
Subject: [Antennaware] Feeding transmission lines with a common source


> I would like to be able to model the situation where two antennas are fed
> through transmission lines from a common source, but am having trouble
> figuring out how to do that in NEC-2.  I tried using a short wire, apart
> from the model itself, with the source in the middle and one transmission
> line connected to each end, but am getting error messages from MultiNEC
> that something is wrong in the transmission line definition.  According to
> the EZNEC documentation I have, this should work, but it doesn't.
>
> Any suggestions much appreciated.
>
> 73, Pete N4ZR
>
> _______________________________________________
> Antennaware mailing list
> Antennaware at contesting.com
> http://lists.contesting.com/mailman/listinfo/antennaware