[Antennaware] Phased Verticals

[Brad Smith]

>You left out a few specs on your antenna system.   Are they separated 
>by 1/4 wavelength?  Do you have 1/4 wavelength 75 ohm lines connected 
>with a coax-T and an additional 1/4 wavelength of 50 ohm line 
>connected between one antenna and one of the 75 ohm lines?  Did you 
>tune each element with an open circuit at the feedpoint of the other element?

The antennas are spaced 1/4 wavelength are are fed with equal length lines of 50 ohm
  coax and a 1/4 wave 50 ohm line is inserted in one line.  Should I have used 75 ohm?
   
  73,
  Brad

       
---------------------------------
Don't let your dream ride pass you by.    Make it a reality with Yahoo! Autos.