[Antennaware] K9AY and FLAG arrays

[Andrew Ikin]

Hello Guys,

Can any one let me have a ENZEC models for a 2 and 3 element endfire K9AY array and a 2 and 3 element FLAG array ( 1.8MHz 20m spacing will do fine ). I would like to compare these to 2 and 3 element loop and vertical arrays.

Btw, I now have Rx 500kHz to 2MHz 3 element endfire phased loop array working. I have added a varible gain/balance pot where the centre element is added to the outer elements. This ensures that I can optimise the array F/B over the band and it also compensates for minor amplitude differences due to the L/C delaylines.

Thanks in advance

Andrew Ikin ( G8LUG not Active )