FT1000 + CT: Trouble

[Jim Reisert AD1C 11-Feb-1993 0918]

------------------Reply to mail dated 11-FEB-1993 07:19:12.28------------------

>Problem: CT (ver 8.21) is interfacing both IC761s and IC765s without 
>errors.  The interface is by J-Com.  Yaesu says I have the only EPROM
>update and this was installed.  The FT1000 is successfully controlled
>by other software.  The Alt-F3 command does not work with CT, the 
>timeout error message appears.  The Alt-F4 command DOES work, but 
>sluggishly.  The CAT System light illuminates each try with Alt-F3.

Msg #1007  From: K1EA  Date: 11-Feb 1317Z  Subj: Re: FT1000 timeout with CT

Yaesu has a fix for this problem. The FT1000/JCOM product need a 2.7K from
pin 1 to pin 2 of the Yaesu din connector. Contact Chip Margelli at Yaesu if
you need further details. - Ken

---

73 - Jim AD1C