CT8 MULTI-MULTI QUESTION

[rthorne at VNET.IBM.COM]

Two questions from a single op who is going to operate at a multi-multi this
weekend.

1 - When daisy chaining several pc's, do they all have to run the same exe.
    In other words does it matter if one pc is runing the ct486.exe and
    another in the daisy chain is running the ct386.exe?  All the pc's will
    be running version 8.

2 - Can you use com1 and com3/com4? for the daisy chain.  I noticed in the
    CT manual, that it talks about com1 and com2.


Direct replies to RTHORNE at VNET.IBM.COM please.

See you all from N4ZC multi-multi.

73, Rich - WB5M

>From Morao Esteban <z801183a at bcfreenet.seflin.lib.fl.us>  Tue Oct 25 14:38:25 1994
From: Morao Esteban <z801183a at bcfreenet.seflin.lib.fl.us> (Morao Esteban)
Date: Tue, 25 Oct 1994 09:38:25 -0400 (EDT)
Subject: DX & Contest Info
Message-ID: <Pine.3.89.9410250937.B792-0100000 at bcfreenet.seflin.lib.fl.us>

Hi, Im trying to put together a small dx bulletin for my club, pse let me
know if you have any incoming operation or any special event that you may
want to have communicated.  

Please feel free to pass this message along,

73 de Steve W4/YV5DTA 

Internet:z801183a at bcfreenet.seflin.lib.fl.us 

Packet:YV5DTA at KD4EMI












>From Mike Hance <75127.1603 at compuserve.com>  Tue Oct 25 15:18:59 1994
From: Mike Hance <75127.1603 at compuserve.com> (Mike Hance)
Date: 25 Oct 94 10:18:59 EDT
Subject: YAESU DVS-2
Message-ID: <941025141858_75127.1603_FHI39-1 at CompuServe.COM>

THANKS FOR READING...

I'm using a DVS-2 with a FT-890 and having a problem when I send a recorded
message it blows my ears out!  The sidetone control has no effect on the DVS-2
you can only turn down the AF gain to control it.  This gets old between each
CQ!  Anyone have a fix for it ?

Thanks and please send info direct to me and I will send out results on
CQ-Contest.  This will keep the clutter down on the reflector.

CUL  Mike Hance

75127,1603 at compuserve.com