[CQ-Contest] Transformer

[Leigh S. Jones]

Elect Corp of America P/N ECA 1171 might possibly be adapted to
your purposes.  This is the transformer used in the Henry 2K-4
amplifier circa 1986.  This transformer is 7.5 inches tall but only
6.25
inches wide --  and could be mounted on its side.  In the actual
delivered configuration a connector block extends the narrow
width a bit, but removing the connector block and making direct
connection to the transformer primary should be no problem.  This
transformer might possibly be found on the Henry Radio web site;
other wise Elect Corp of America was located in South Gate,
California, USA according to the markings on the transformer.

----- Original Message -----
From: "Pavel Perchine" <un7lg at nucleus.com>
To: <cq-contest at contesting.com>
Sent: Saturday, January 26, 2002 8:54 AM
Subject: [CQ-Contest] Transformer


>
> Hi everybody,
>
> I am looking for a transformer which I am going to fit in my
enclosure.
> The transformer itself is not a problem at all,but I have only one
critical
> dimension  - it must be no more than 6,5 inches in height.
> It is a problem.
> It is going to be a plate transformer for a pair of 4CX800.
>
> If anybody knows some manufacturers or seller to look for any
> transformers,please let me know.
>
> Thanks!
>
> Paul
> VA6LBI
> ex UN7LG
>
>
> --
> CQ-Contest on WWW: http://lists.contesting.com/_cq-contest/
> Administrative requests: cq-contest-REQUEST at contesting.com


--
CQ-Contest on WWW: http://lists.contesting.com/_cq-contest/
Administrative requests: cq-contest-REQUEST at contesting.com