[CQ-Contest] Foot switches
Gus Samuelson
gussam at newcomm.net
Mon May 6 12:33:39 EDT 2002
Try You nearest Singer Sewing machine centre or look for an old
Dictaphone machine foot peddle
both are very durable
have two switch contacts spaced well enough so that even big feet
can handle 'em .... re-wire and le voila there it is.
Have had one for about 15/16 years never had a problem with it
73
Gus Samuelson/VO1MP
----- Original Message -----
From: "Kelly Taylor" <ve4xt at mts.net>
To: <cq-contest at contesting.com>
Sent: Friday, May 03, 2002 11:27 PM
Subject: [CQ-Contest] Foot switches
> Hi all,
>
> I noted with interest Richard's query about the FS2 footswitch and Dale's
> piano man solution. Interesting.
>
> I noticed the FS2 has the hinge at the heel. Although it seems to make
> sense, it's always seemed more fatiguing to my legs to have the switch in
> that position than to simply use my toes since the other way requires
moving
> muscles all the way up to the knee.
>
> Has anyone ever experimented with non-footswitch, non-VOX alternatives? As
a
> touch typist, the heel of my hand never strays too far from the keyboard
but
> like Dale, I've been frustrated by having to reposition the footswitch in
> the middle of a run.
>
> Perhaps it's worth trying something that can serve both as an ergonomic
tool
> (to keep the heel of your hand in the right position) and as a PTT device.
I
> hate VOX. Or perhaps a shoe like some bank tellers wear that contains a
> switch to set off the holdup alarm. Not sure if those are even in use
> anymore.
>
> Perhaps a pressure sensor on the back of the operating chair. LBTT, as it
> were. (Lean Back To Talk.) I often tend to lean back when CQing anyway.
>
> Then again, there's always the clapper. Clap once, PTT on, clap twice, PTT
> off!
>
> OK, that last one was TIC (tongue in cheek). Also, anyone ever come up
with
> a useful function for additional switches on the fs? Mine (a Wollensack
> dicating machine unit from Fair Radio Sales) has the main body of the
> footswitch as one (in my case, PTT) switch and two switches at each side.
It
> seems neat, but it also seems that any additional functions would have to
be
> closely related to the act of PTTing, since you're likely to do that by
> mistake anyway when you go for the other switches.
>
> Any thoughts?
>
> 73, kelly
> ve4xt
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
More information about the CQ-Contest
mailing list