[CQ-Contest] TS-940 owners query

[Leigh S. Jones]

All of the TS940's  I've ever used have this feature to some degree.
It
becomes more obvious as the bands become more quiet -- such as
when you move up to 10 meters at night.  Tighten the CW VBT and
you will peak it.  Put a resistor in series with your headphone leads
and
you might attenuate it to a tolerable level.

----- Original Message -----
From: "DAN KOVATCH" <w8car at buckeye-express.com>
To: <cq-contest at contesting.com>
Sent: Wednesday, November 06, 2002 11:32 AM
Subject: [CQ-Contest] TS-940 owners query


> I hope this is not too far afield for the group. A friend has a
ts940s
> with a CW problem. While receiving CW (with or without 500hz
filters)
> there is a 'tone' on all the time. He says it sounds like a BFO type
> tone bleeding through. The tone is present on all bands and is very
> audible when listening on just a dummy load. The tone does not
appear to
> 'beat'against signals. If anyone on the list has had any experience
with
> this problem please e-mail me. We have checked the Kenwood service
> bulletins and find nothing resembling this problem.
> --
> 73 Dan
> W8CAR
>
> Dan Kovatch
> en81 Erie County OH
> www.qsl.net/ncc
> www.geocities.com/w8car
>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest