[CQ-Contest] HyGain BN4000 Balun Question

[K0HB]

If what VE1DT says is true, then ignore my previous message.  I'd always
assumed the 4000 was just a beefier version of the BN86 which is a
traditional "wound on toroid" design.

73, de Hans, K0HB

--
 ><{{{{*>    http://www.home.earthlink.net/~k0hb   


> [Original Message]
> From: Jim George <n3bb at mindspring.com>
> To: <cq-contest at contesting.com>
> Date: 8/5/2008 11:52:25 PM
> Subject: [CQ-Contest] HyGain BN4000 Balun Question
>
> We will almost certainly be replacing a HyGain BN4000 one-to-one balun
here 
> shortly with a WX0B one-to-one balun. It is important to get the "center 
> conductor" connected to the same half-element of the driven element in 
> order to maintain polarity and phase in a stacked yagi system of 205CAs. 
> Can one use an Ohmmeter to check which output lead of a BN4000 goes to
the 
> center conductor of the PL259 and which lead to the shield?
>
> Jim George
> N3BB
>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest