[CQ-Contest] Problem w/CQWW Robot

[Robert Chudek - K0RC]

Hello Richard,

The robot is not expecting a value other than 0 or 1 for the transmitter 
number (last number on each line). I suspect (guessing) this is correct 
for a Multi-Two category. Check your Carrillo header to verify the 
classification you are claiming.

If it shows Multi-Multi, your best solution would be to post your 
question directly to the contest sponsor for definitive resolution:

"Questions pertaining to the CQ WW DX Contest rules may be submitted by 
e-mail to questions at cqww.com <mailto:questions at cqww.com> "

73 de Bob - KØRC in MN

------------------------------------------------------------------------
On 11/26/2013 12:42 PM, Richard L. King wrote:
> Hi all.
>
> I am trying to submit a M/M (unlimited) log to the CQWW CW Robot. We 
> ran three different station positions and networked them together. 
> They are identified as stations 0, 1, and 2. I used Writelog for the 
> logging program and used it to prepare a cabrillo file.
>
> All the log created from station 2 is not being accepted. Here is an 
> example of what I am getting back from the robot.
>
> I do not recognize '2' as a valid transmitter id.
> [X] QSO: 28041 CW 2013-11-23 0014 K5NA        599   04 RW0MM 599   19  2
> Line ignored.
>
> Can anyone suggest what I might be doing wrong? All the station 0's 
> and 1's QSOs seem to be OK with the robot.
>
> Thanks.
>
> 73, Richard - K5NA _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>