[CQ-Contest] Problem w/CQWW Robot

[Randy Thompson K5ZD]

The Cabrillo format only requires the transmitter number for MS and M2
entries.  This number can ONLY be 0 or 1.  That is why you are getting
errors for other values.

Delete the transmitter number column completely and you will be fine.

Full details on the Cabrillo spec for use with CQWW is available at
http://www.cqww.com/cabrillo.htm 

A great place to send questions like this is questions at cqww.com.  


Randy, K5ZD


> -----Original Message-----
> From: CQ-Contest [mailto:cq-contest-bounces at contesting.com] On Behalf Of
> Richard L. King
> Sent: Tuesday, November 26, 2013 6:43 PM
> To: cq-contest at contesting.com
> Subject: [CQ-Contest] Problem w/CQWW Robot
> 
> Hi all.
> 
> I am trying to submit a M/M (unlimited) log to the CQWW CW Robot. We ran
> three different station positions and networked them together.
> They are identified as stations 0, 1, and 2. I used Writelog for the
> logging program and used it to prepare a cabrillo file.
> 
> All the log created from station 2 is not being accepted. Here is an
> example of what I am getting back from the robot.
> 
> I do not recognize '2' as a valid transmitter id.
> [X] QSO: 28041 CW 2013-11-23 0014 K5NA        599   04 RW0MM      599
> 19  2
> Line ignored.
> 
> Can anyone suggest what I might be doing wrong? All the station 0's and
> 1's QSOs seem to be OK with the robot.
> 
> Thanks.
> 
> 73, Richard - K5NA
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest