[CQ-Contest] Off Topic - IC706MKIIG and Filtering

Tom Osborne w7why at frontier.com
Fri Dec 18 18:58:19 EST 2015

Inrad makes filters for the IC-701.

I have an INRAD 250 cycle filter in my Kenwood and really like it.

Check http://qth.com/inrad/  73
Tomm W7WHY

On Fri, Dec 18, 2015 at 10:32 AM, Paul Gundersen <pgunders at att.net> wrote:

> Tim,
> You might consider using an AUDIO Filter. It will be compatible with
> almost any rig. It would not perform as well as an IF Filter, but it should
> be worth the effort.
> MFJ?  I might even have one in my shack which I am not using.
> Paul F. Gundersen, KE8NN
> Quality Assurance Engineer
> P: 440-871-7010
> C: 440-862-7949
> F: 440-899-9986
> --------------------------------------------
> On Fri, 12/18/15, Timothy A. Holmes <taholmes160 at gmail.com> wrote:
>  Subject: Off Topic - IC706MKIIG and Filtering
>  To: CQ-contest at contesting.com, "nodxa" <nodxa at lists.contesting.com>,
> "'William J Squires'" <n8ws73 at gmail.com>, "'Al'" <n8cx at mindspring.com>,
> "'Axel'" <alpha15 at live.com>, "'Bob N8BSW'" <rfaud at netlink.net>, "'Bob'" <
> bndplow at hotmail.com>, "'Brian'" <bhemmis at mac.com>, "'Dale'" <
> dhorn1 at san.rr.com>, "'Dave M.'" <k8gvk at arrl.net>, "'Dave-K8YQL'" <
> k8yql at yahoo.com>, "'Dave-WV8P'" <wv8p at roadrunner.com>, "'David'" <
> 42dkmetz at gmail.com>, "'Dick'" <k8ab at sbcglobal.net>, "'Don'" <
> w8idm at juno.com>, "'Don Brown'" <donbrown6180 at sbcglobal.net>, "'Dwaine'" <
> k8me at sbcglobal.net>, "'Egon'" <ab8hy at arrl.net>, "'Frank'" <
> roman129 at yahoo.com>, "'Franklyn'" <franklyn.santana1 at gmail.com>, "'Gary'"
> <GLimbert at yahoo.com>, "'George'" <geokay123 at yahoo.com>, "'Hal'" <
> w8pn at stratos.net>, "'Heinz'" <hlwimmer at zoominternet.net>, "'joem'" <
> joe-k8yn at att.net>, "'John'" <talleres656 at att.net>, "'JohnB'" <
> ac8e at zoominternet.net>, "'JohnD'" <John at DeBarr.net>, "'karl'" <
> wa8nvw at arrl.net>, "'kd8rb'" <kd8rb at arrl.net>, "'Ken'" <w8kh at aol.com>,
> "'Kevin'" <k8vus at sbcglobal.net>, "'KI8IF'" <ki8if_jb at ameritech.net>,
> "'Larry'" <kc8vzz at yahoo.com>, "'Leon'" <leonz1 at cox.net>, "'Mark K8PY'" <
> hackmaster_i_m at yahoo.com>, "'Mark NB8I'" <nb8i at ymail.com>, "'Marty'" <
> mjcon6157 at hotmail.com>, "'Metro'" <metro351 at sbcglobal.net>, "'Norm'" <
> w8pj at msn.com>, "'Paul'" <pgunders at att.net>, "'Pete Rimmel'" <
> n8pr at bellsouth.net>, "'Richard'" <richard.karpinski at tri-c.edu>, "'Stan'" <
> skorzep at cfl.rr.com>, "'Stephen'" <n8wb at roadrunner.com>, "'Steve OLH'" <
> kd8olh at yahoo.com>, "'Ted'" <xrayted10 at aol.com>, "'Teodor'" <
> igroupaccount at gmail.com>, "'Tom'" <ka8wli at yahoo.com>, "'Vesselin'" <
> vesselin_zhelezov at yahoo.com>, "'Vicki'" <vickimate at att.net>
>  Date: Friday, December 18, 2015, 9:05 AM
>  HI Folks;
>  I have an IC706mkIIG that for the most part I really like,
>  however, it
>  does not have any filters of any kind in / on it.  I am
>  planning to
>  replace it as soon as I can, however between now and then, I
>  would like
>  to come up with some way to filter the received
>  signals.  The radio has
>  2 slots for icom filters which are very difficult to find
>  (at least
>  according to vendors at Dayton this year) (and when you do
>  find them
>  they are expensive) I was wondering if there was a way I
>  could tap that
>  signal chain at the filter slots and take the signal out to
>  my computer
>  for audio processing, and then either hear it directly from
>  the computer
>  or return it to the radio for further "voodoo" before it
>  gets to my ears.
>  I'm not very familiar with receiver functioning nor audio
>  processing
>  like this so this is kinda stretching my limits a bit here
>  as far as
>  technical stuff goes, so I might need some in depth
>  explainations
>  Thanks
>  TIM
>  W8TAH
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest

More information about the CQ-Contest mailing list