[CQ-Contest] Beam heading analysis from Field Day log

[Jeff AC0C]

Yan,

Thanks for the suggestions.  But I found that ViewProp from ZL2HAM can do it 
based on physical QTH locations (it does a QRZ.COM lookup for each entry). 
It's a very slick application.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: XV4Y (Yan)
Sent: Saturday, July 04, 2015 8:12 PM
To: cq-contest at contesting.com
Subject: Re: [CQ-Contest] Beam heading analysis from Field Day log

Hi,

QScope does that.
https://www.qscope.org/

However it can only use the information you provide :
- with ADIF file, it will use geolocation from Gridsquare locator if 
available, if not, it will guess geolocation from callsign using AD1C 
BigCTY.
- with Cabrillo, the only way is to guess geolocation from callsign

What I would do if I were you :
- Import my Cabrillo/ADIF into DXKeeper (or any other "fully featured" 
logbook software)
- USe DXKeeper to retrieve Gridsquare info from QRZ.com or another callbook
- export the ADIF file and import it to QScope

73,
Yan.
---
Yannick DEVOS - XV4Y
http://xv4y.radioclub.asia/
http://varc.radioclub.asia/

> Le 4 juil. 2015 à 23:00, cq-contest-request at contesting.com a écrit :
>
> Message: 2
> Date: Fri, 3 Jul 2015 20:54:07 -0500
> From: "Jeff AC0C" <keepwalking188 at ac0c.com>
> To: <cq-contest at contesting.com>
> Subject: [CQ-Contest] Beam heading analysis from Field Day log
> Message-ID: <C490D036540C4A00B5B02F2B9137168D at w520>
> Content-Type: text/plain; charset="Windows-1252"
>
> I have been using SH5 to do log analysis.  But for field day with mostly 
> domestic locations, the results are not good.
>
> Is there a program available that would show what the beam heading 
> distribution is for a FD cabrillo or ADIF log?
>
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie

_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest