[CQ-Contest] Multi 2 locking device?

Jukka Klemola jpklemola at gmail.com
Thu Jan 5 13:34:01 EST 2017


Oh .. and about operating on the same band..
You use LP.
If you have separate antennas for each radio, you should have no problems.

If you want to share the antennas, I do not know of any commercial products
for the use you describe.


73,
Jukka OH6LI


2017-01-05 20:31 GMT+02:00 Jukka Klemola <jpklemola at gmail.com>:

> For M2, you do not need a PTT interlocking device if you use two radios.
>
> If you use two radios per band, then you need a PTT interlock for those
> two radios on each band.
> If you use a third radio for 3rd band multipliers, you need an interlock.
> This 3rd band interlock can be complex, depending on how you want to
> operate.
>
> But, for a M2 station with just two radios, one for a band at a time, you
> do not need an interlock.
>
>
> 73,
> Jukka OH6LI
>
>
>
> 2017-01-05 20:03 GMT+02:00 Fco. Luis Delgadillo <xe2b at outlook.com>:
>
>> Hola,
>>
>> I'm planning to operate M2 LP, the oncoming contest season.
>> I do have two WX0B passbands filters from my previous SO2R setup.
>>
>> -Only two radios will be used.
>> and
>> - Very simple antennas setup on a city lot:
>> Log periodic Cushcraft ASL-2020
>> Vertical tribander Force13 VR-3
>> Twin Slopper Alpha-delta DX-A
>>
>> Is there any summary related to options available for locking devices to
>> prevent two radios to operate in the same band?  I do not want to have
>> burned front ends.
>> Preferably,  I would like to build it.
>>
>> I appreciate the feedback
>>
>> 73
>>
>> Luis XE2B
>>
>>
>> Enviado desde mi Huawei de Telcel
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest at contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>
>
>


More information about the CQ-Contest mailing list