[CQ-Contest] RECORDING ON FT5000 FT2000 FT950

[Steve London]

Correction...

It has been brought to my attention that the rule says:

"...  must record the transmitted and received audio as heard by the
operator for the duration of the contest operation"

For my station configuration, that is "interesting". Running SO2R, I 
always have the CW sidetone and SSB TX Monitor muted. Thus, the operator 
(me) doesn't hear any transmitted audio, and, therefore there is no 
transmitted audio to be recorded.

73,
Steve, N2IC


On 03/05/2017 07:49 AM, Steve London wrote:
> For the purposes of CQWW and WPX recording, your transmit audio is not
> required. They want to hear what you heard.
>
> 73,
> Steve, N2IC
>
> On 03/04/2017 09:01 PM, Trent Sampson wrote:
>> All this recording talk has made me revisit the shack configuration.
>>
>>
>> After testing the FT2000 FT950 I can get the RX audio out of the
>> RECORD Jack on the rear panel but no transmit audio on any modes
>>
>>
>> The Manual(s) says to set monitor to on - but there is no difference -
>>
>>
>> Modes will be SSB RTTY and CW.
>>
>>
>> Has anyone successfully done this or do I need to try some other point?
>>
>>
>> My issue is the FT5000 rigs are at a remote site and really want to be
>> able to sort this out prior to the 4 hour round trip to the remote.
>>
>>
>> Thanks in advance.
>>
>>
>> Regards
>>
>> Trent
>> VK4TS
>> PO Box 275
>> Mooloolaba 4557
>> 0408497550
>>
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest at contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>