[CQ-Contest] Doctor DX clone (if you never used it, you just don't "get it")

Barry W2UP w2up.co at gmail.com
Thu Oct 1 13:04:08 EDT 2020

In a previous discussion of Dr DX a number of years ago (maybe on this
list, maybe elsewhere...), I recall the programmer of Dr DX responded to a
post about it.  IIRC, he was a 6-land guy.  Maybe some google and/or list
archive searches will find that post, if someone is interested in pursuing

Barry W2UP

On Thu, Oct 1, 2020 at 10:57 AM Tim Shoppa <tshoppa at gmail.com> wrote:

> N4ZR asks:
> > Does anyone know the identity of the programmer?? Seems that if source
> > code were available it should be possible to recompile for Windows
> > without too much difficulty.
> A little like suggesting building a Stradivarius is as simple as finding
> Mr. Stradivarius' CAD drawings and running it through a 3-D printer.
> Pete, this is a Commodore 64 and the source code is certainly 6502 Assembly
> directly bit-banging on the C64-specific peripherals.
> The fact that Dr DX achieved so much using stone knives and bear skins as
> the base technology makes it a more impressive marvel than a Stradivarius
> :-)
> Rich's original post where he mentions the possibility of a C64 emulator
> seems very promising. The paddle/keying would have to be a custom I/O mod
> to the C64 emulator but many are modular enough to add simple peripherals
> like this.
> C64's are quite commonly available used and the ROM dump Rich identified
> may allow a new cartridge to be burned. Presumably the paddle/keying is
> done the simplest way possible.
> Tim N3QE
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest

More information about the CQ-Contest mailing list